Contrary to what many say, the Palm Desktop will work on the new Windows operating systems, Vista, Windows 7, 8 and 10, with either the 32 or 64 bit OS. If you have the 32 bit OS then do not install the driver below as it is not necessary. If you have the 64 bit OS you will need the driver below and once it is installed your Palm will hotsync with your computer just as previous systems. To find out if you have the 32 or 64 bit OS please use the link below;
- Amd Usb 2.0 Driver Windows 10 64 Bit
- Install Usb Driver Windows 10
- Usb 2.0 Video Camera Driver Windows 10 64 Bit
- Usb 2.0 Driver Windows 10 64 Bit Hp
- Usb Driver Update For Windows 10 Download
We can arrange to dial into your computer and install the required driver remotely, the typical fee for this service is $35 for the first 30 minutes, please see our PalmDr Phone Service for details and available hours.
The ACEECA corporation has developed a 64 bit driver for their handhelds, running the Palm OS, so the instructions refer to an Aceeca device/PDA – just ignore this labeling and know they mean the Palm device. This driver is only necessary for the USB driver, it is not necessary for the BlueTooth(BT), Infra Red(IR), WiFi, or serial.
1) Install the Palm Desktop software from the CD as normal. You must have the Palm Desktop software installed before installing the 64 bit drivers. If you do not have the installation CD you can order one from our website here;
Install CDs
2) Download 64 bit driver instructions from the link below.
Windows 64 Bit Insturctions
3) Download the 64 bit drivers, this is a Zip file so you must extract it to a place you can later find;
Windows 64 Bit Drivers Download
MultiMix USB 2.0 - Windows Driver v2.9.64 (32 and 64 bit) Supports Windows 7, 8, and 10 Download; MultiMix USB 2.0 - Windows Vista/XP 32 Bit Drivers v2.8.12 Driver version v2.8.12 - Windows XP and Vista (32 bit only). Download; MultiMix USB 2.0 - Firmware Update for Windows v1.10 Download; MultiMix USB 2.0 - Macintosh Driver 3.3.3 OS X EL. I have an old ezcap usb 2.0 video capture who was supported on windows xp/vista/7/8 32 and 64 bit. But now I've upgraded to windows 10 and I can't use the device anymore, because the driver is not suported. I still have the box, and it's white with an Orange and black color it write down Ver36.1.
For more information read the following link;
http://forum.brighthand.com/palm-tx/281989-how-install-new-aceeca-64bit-drivers-tx.html
- Alesis multimix 8 usb 2.0 driver 64 bit Downloading the latest driver releases can help you resolve driver conflicts and improve your computer's stability and performance. So just click upper link to Alesis multimix 8 usb 2.0 driver 64 bit now.
- MultiMix USB 2.0 - Windows Driver v2.9.64 (32 and 64 bit) Supports Windows 7, 8, and 10 Download; MultiMix USB 2.0 - Windows Vista/XP 32 Bit Drivers v2.8.12 Driver version v2.8.12 - Windows XP and Vista (32 bit only). Download; MultiMix USB 2.0 - Firmware Update for Windows v1.10 Download; MultiMix USB 2.0 - Macintosh Driver 3.3.3 OS X EL.
- The package provides the installation files for Realtek USB 2.0 Card Reader Driver version 10.0.7. If the driver is already installed on your system, updating (overwrite-installing) may.
Windows 8 and 10
With Windows 7, 8 and 10 you should be use the 6.2 version of the Palm desktop in most cases. The installation is the same for Windows 7, 8 and 10, if you run into a problem of only seeing the Media in the Palm Desktop then you must be sure to start the Hotsync Manager and Palm Desktop with the 'Run as administrator'.
These instructions are a work in progress so an changes/problems will greatly help others with the same problems so please reply with feedback, good or bad.
Thank you,
Chris Short, President
Short Tronics, INC.
www.PalmDr.com
Name: | |
Email: | |
Website: | |
Review Title: | |
Rating: | 2 4 |
Review: | |
Check this box to confirm you are human. |
The instructions refer to Win7 only, so there's a bit of 'interpretation' required when installing on Win10. The last two pages contain the critical information.
The new drivers work; that's a plus. The suggested v6.2 desktop is lacking in a few areas such as calendar entry colors and other niceties that exist in v4.1.
Palm T|X being used.
Thank You Very much !!!) You can give me a hope, what good hardcore programmers ALIVE !!!)))) PALM FOREVER!!)))
Perfect! I had forgotten windows 7 and the palm Zire 31 didn't exactly see eye to eye.
Glad I found this solution! It works flawlessly! I got the palm up and running again specifically because i wanted the computer/handheld interface
Like so many others, I love my Palm Pilot and have used one since 1997. With Windows OS constantly updating, I keep worrying that I will eventually have to give it up, but alas, your website helped me continue to use it. I love that I don't have all of my private info and passwords in my phone or in the cloud. This week I loaded windows 10 64 bit and tried to install my palm pilot with no success.
I did all that you said in this post, but then I couldn't get my palm information to show in the Palm Desktop. After some research, I found the link to this website to provide a 'patch' for legacy Palm Pilots (Tungsten C). Then all of the data showed up in my Desktop again. Yay!!!
http://www.pimlicosoftware.com/legacy.html
This is what the website says..
When most of the other Palm OS vendors dropped out of the market, Palm rewrote their PIM applications and came out with a new internal architecture that was not fully compatible with Palm OS applications written for the earlier generation devices. We refer to the older devices as Legacy devices. Here is a list of specific devices which fall into each category:
Legacy Devices: any device running OS4 or earlier, any non-Palm brand handheld (Sony, Garmin, etc.), or Treo-600, Tungsten C/T/T2, Zire-71
Newer Devices: any Treo model except Treo-600, Tungsten T3/T5/Tx/LifeDrive, Zire 72/31
Amazing. Worked like a charm. Thank you for all you do!!
This procedure has worked perfectly with my Palm Zire 22 which is legacy model from the past. I thought I would never get the data transferred but it has worked perfectly with Windows 10. Thanks so much..
Well..I confess: I am a PALM orphan.
And as technology 'improves' - in all connected and virtual and cloud ways - I still remember my days when I just could 'access' a Contact detail in my PALM handheld without worried 'if' I'll have a wifi OR 3/4/4.5/4+/5G connection (of my 'smartphone').
In very special when I am visiting Industrial customers in the countryside, and also want to use my (old, I know!) IAMBIC solutions.
YEARS has gone and I still keep my 2 PALM Centros, and 1 Zire 71 in a hope that, 'one day', I could sync it with my 64bits computers.
So.. I want to really THANK YOU very, very, very much to make it possible!: PALM OS HotSync is up and running on my Desktop Windows 7 64bits.
(I will do the same procedure to my notebooks Windows 10).
My very best regards!
Marcos Luiz S. Filho
(from Brasil)
Thanks so much, PalmDr! Saved everything!
Previous Palm desktop on Windows 7 and Hard Drive crashed.
Now wrestling with Windows 10, more ways than this!
Loaded version 6.2, but with W10, unit did not connect to laptop at all, so 1st windows of Aceeca instructions never appeared. Launched Device Mgr, but NO 'Other devices' in list. After many head scratches, I found 'Show Hidden Devices' under VIEW, and there it was. Then 64 bit Drivers then installed easily as per the instructions, and Hot Sync worked perfectly.
Great service!
After a few hours trying to install Documents to Go, I realized my OS was 64bit. During the process, I briefly came across this site. I downloaded the driver, ran a driver update and my Dana chimed, the install manager began automatically!!! I did previously do the Dana 1.5 update. For the update, I copied the zip contents to an SD card, did a copy on to my Dana, and did the upgrade. Unit was plugged in to 7.5v power. The update came from http://support.renaissance.com/techkb/techkb/10508968e.asp. Make sure you have the 16mb unit. THANK YOU!!!
Amd Usb 2.0 Driver Windows 10 64 Bit
Thank you very much. You support my Palm m500 HotSync on Windows 10!
SPD USB Driver allows you to connect your Spreadtrum based chipset devices to the windows computer during the flashing.
All these SPD drivers are officially released by the SpreadTrum Company which have been scanned by the Antivirus Program before uploading on this page.
After successfully installing the driver on your Windows computer you will be able to connect your Spreadtrum chipset based mobile device during the flashing process or for connecting the mobile device to the PC.
About SPD USB Driver
SPD driver is a small file that allows a Spreadtrum device to communicate with the OS of a computer. These USB drivers help mobile users to perform multiple tasks on their Spreadtrum based device such as flashing SPD devices, unlocking, backup and restoring etc.
Additionally, it can also help you to restoration your Spreadtrum device's IMEI numbers that are become invalid during the wrong flashing procedure.
It's developed by SpreadTrum communications Inc that helps you to connect your mobile device to the windows computer without installing the ADB driver or any other driver.
Install Usb Driver Windows 10
It's compatible with all versions of windows and straightforward to install on any versions of Windows.
Features
Support SPD Flash Tool:
It supports SPD Flash Tool (spd research tool), that is the official flash tools for SpreadTrum based devices and used to flash PAC firmware on Spreadtrum mobile device. SPD Upgrade tool also is known as SPD Flash Tool which is usually used to flash PAC format firmware on SpreadTrum (SPD Chipset) based devices.
Usb 2.0 Video Camera Driver Windows 10 64 Bit
Support WriteIMEI Tool:
It supports Write IMEI Tool to flash or repair your Spreadtrum device's IMEI numbers that are become invalid during the wrong flashing procedure. You must have to Install SPD USB driver in order to repair your device IMEI numbers while using WriteIMEI Tool.
Support Box Software:
It supports multiple Box Software such as Volcano Box, Medusa Box, Piranha Box, Infinity Box and Miracle Box, etc. Miracle Box tool is used to fix the mobile devices software issues, especially of Chinese mobile devices based on supported CPUs.
Supported Operating system
Spreadtrum USB Driver works with all version of Windows operating systems like Windows XP, Windows Vista, Windows 7, Windows 8, and Windows 10 (32 bit or 64-bit version of Windows).
Supported Box and Tools for SPD USB Drivers:
- Volcano Box Software
- Miracle Box Software
- SPD Research
- Piranha Box Software
- Infinity-Box Software
- SPD Upgrade Tool
Download SPD Driver for Windows Latest Version 2020
How to Install SPD Driver Manually
There are two ways to install the Spreadtrum driver it depends on which file you have downloaded. If you download .exe file Auto Installer, you just have to follow below steps to install the driver on your computer.
Method 1: Direct Installation
Step 1: First, extract the downloaded ZIP-file on your PC and open extracted folder to install the SPD driver.
Step 2: Spreadtrum USB Driver setup is available for both 32-bit and 64-bit.
Step 3: Double click to run .exe file and follow the screen instructions by click Next > Next > Finish. That's All!
Usb 2.0 Driver Windows 10 64 Bit Hp
Method 2: Manual Installation
Any driver who does not have an executable (.exe) file for installation, you have to install it manually. You just have to follow the below steps to install the driver on your computer. Explorers 1985 torrent download utorrent.
- Right-click on the downloaded SPD driver ZIP-file, extract zip files on your computer.
- Open Device Manager, in device Manager, click on the Action tab and select Add legacy hardware from its dropdown menu.
- Click on the 'Next' button in the hardware wizard window.
- Select Install the Hardware that I manually Select from a list (advanced) and then click on Next Button.
- Now, select 'Show All Devices' and click on the Next.
- Now, Click on 'Have Disk' Button.
- Click on Browse and locate to the folder that extracted contains the USB driver files. Click 'Open' when the file is selected.
- Click 'OK' when the driver file is selected.
- Click Next. Click on Next again to install the driver.
- Now, Click on 'Install this driver software anyway'.
- Now click on Finish to complete adding hardware wizard.
Usb Driver Update For Windows 10 Download
Video Tutorial to Install the SPD Driver Manually
Additional Information:
The Third-Party INF Does Not Contain Digital Signature: If you face digital signature error in installing the driver then See This Video for solve Digital Signature error in few clicks.
Free downloads for mac. To promote England Exchange and grow its popularity , use the embed code provided on your homepage, blog, forums and elsewhere you desire.Or try our widget. England Exchange. A downloadable game for Windows, macOS, and Linux. Buy Now $15.00 USD or more. An International Affair. Mac Version 124 MB. Linux Version 127 MB. Windows Demo 89 MB.
Tutorials: If you want a tutorial related to Android flashing, then head over to our Tutorial Section, where you will find lots of stuff related to Android.
How to Use SPD Flash Tool: If you want to learn that How to flash the firmware on any Spreadtrum Android Device then head over to this page we have shared Easy, step-by-step, illustrated instructions for Flash Pac Stock Rom on Android device.
SPD Driver: It's mandatory to install the SPD (Spreadtrum) driver in order to flash the SPD based mobile device CPUs.
Credits: All the credit goes to SpreadTrum communications Inc because they created SPD USB driver and distributed with us free.